If the green network status light is off and the orange network status light is flashing, Wi-Fi setup failed. Press to clear this error, and then try WPS setup again from step 1.
Check the following items.
- Check that the access point is turned on. If it is turned off, turn it on and then perform network setup again.
- Place your printer close to the access point.
- Check that the Wi-Fi communication mode (IEEE802.11*) set for your access point matches the one supported by your printer. (*Display varies according to your location.)
- If the MAC address filtering function is enabled, register your printer's MAC address to prevent your printer from being filtered.
- Check whether or not the DHCP function for the access point is enabled. If it is disabled, change it to enabled.